Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yoke Handle For Sale(Kickstarter Option)
01-16-2016, 01:54 PM (This post was last modified: 01-18-2016 04:12 AM by iwik.)
Post: #1
Yoke Handle For Sale(Kickstarter Option)
    Hi Guys,
We have seen what the handle is that KS backers will receive and what
ID will supply.
I have a Yoke handle surplus to requirements that came off a PFC built
desktop Yoke. It is a Cast Aluminum with 12 buttons and no Hat switch. I am sure there is room in the handle to fit the optional handle
board offered by ID. As I don't have it so I cant be 100% sure but what measurements I have it should be ok.
The collar for attaching to the shaft is 19mm and the one on the yoke
I think is 22mm but that would have to be confirmed. Although another collar could be easily attached to the handle.
I have attached pictures and should any one be interested please PM
with your best offer. I am not expecting anywhere near ID price.
I would be using it on my yoke if I hadn't another option.
Regards
Les


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
01-16-2016, 07:08 PM
Post: #2
RE: Yoke Handle For Sale(Kickstarter Option)
(01-16-2016 01:54 PM)iwik Wrote:  Hi Guys,
We have seen what the handle is that KS backers will receive and what
ID will supply.
I have a Yoke handle surplus to requirements that came off a PFC built
desktop Yoke. It is a Cast Aluminum with 12 buttons and no Hat switch. I am sure there is room in the handle to fit the optional handle
board offered by ID. As I don't have it so I cant be 100% sure but what measurements I have it should be ok.
The collar for attaching to the shaft is 19mm and the one on the yoke
I think is 22mm but that would have to be confirmed. Although another collar could be easily attached to the handle.
I have attached pictures and should any one be interested please PM
with your best offer. I am not expecting anywhere near ID price.
I would be using it on my yoke if I hadn't another option.
Regards
Les

In addition to Les's offer and just for info, there is some more advice in the FAQ section of the Iris website. One item is a conversion coupling available from a US company, I tried to order from here in the UK but they were unable to supply as they said export duties and the like were a problem "Due to the cost of complying with extensive US export regulations, McMaster-Carr accepts international purchases only from our established international customers." I did find out however that the shaft diameter is 7/8 inch, information which may be of use to someone. I had measured it as some oddball metric size but never got round to converting it.
Meantime my new handle board is due next week so will post progress when I attempt to fit it.
Find all posts by this user
Quote this message in a reply
01-16-2016, 07:19 PM
Post: #3
RE: Yoke Handle For Sale(Kickstarter Option)
(01-16-2016 01:54 PM)iwik Wrote:  I have a Yoke handle surplus to requirements that came off a PFC built
desktop Yoke.

WHERE ARE YOU?

MarkH

[Image: 74a2117f47009890699829d38699715a.jpg]
Find all posts by this user
Quote this message in a reply
01-16-2016, 07:45 PM
Post: #4
RE: Yoke Handle For Sale(Kickstarter Option)
(01-16-2016 07:19 PM)MarkH Wrote:  
(01-16-2016 01:54 PM)iwik Wrote:  I have a Yoke handle surplus to requirements that came off a PFC built
desktop Yoke.

WHERE ARE YOU?

Does this mean you have or are expecting immediate delivery of your prize? Just curious.Tongue
Find all posts by this user
Quote this message in a reply
01-16-2016, 08:14 PM
Post: #5
RE: Yoke Handle For Sale(Kickstarter Option)
(01-16-2016 07:45 PM)john MD Wrote:  Does this mean you have or are expecting immediate delivery of your prize? Just curious.Tongue

No, but even I can be optimistic Dodgy I did get a UPS notification last week but it was a false alarm. (My Tobii EyeX arriving from Sweden!)

MarkH

[Image: 74a2117f47009890699829d38699715a.jpg]
Find all posts by this user
Quote this message in a reply
01-16-2016, 09:58 PM
Post: #6
RE: Yoke Handle For Sale(Kickstarter Option)
(01-16-2016 08:14 PM)MarkH Wrote:  
(01-16-2016 07:45 PM)john MD Wrote:  Does this mean you have or are expecting immediate delivery of your prize? Just curious.Tongue

No, but even I can be optimistic Dodgy I did get a UPS notification last week but it was a false alarm. (My Tobii EyeX arriving from Sweden!)

Glad to hear that Mark. I'd never heard of Tobii but it looks intriguing......more money.
Find all posts by this user
Quote this message in a reply
01-17-2016, 03:52 AM
Post: #7
RE: Yoke Handle For Sale(Kickstarter Option)
WHERE ARE YOU?

New Zealand
Les
Find all posts by this user
Quote this message in a reply
01-17-2016, 05:27 AM
Post: #8
RE: Yoke Handle For Sale(Kickstarter Option)
(01-17-2016 03:52 AM)iwik Wrote:  New Zealand

OUCH. What do you think the shipping would be (and how much are you asking)? By PM if you want.

MarkH

[Image: 74a2117f47009890699829d38699715a.jpg]
Find all posts by this user
Quote this message in a reply
01-17-2016, 09:28 AM
Post: #9
RE: Yoke Handle For Sale(Kickstarter Option)
(01-17-2016 05:27 AM)MarkH Wrote:  
(01-17-2016 03:52 AM)iwik Wrote:  New Zealand

OUCH. What do you think the shipping would be (and how much are you asking)? By PM if you want.

Mark,
Shouldn't be too bad, ill check tomorrow for you and PM.
Les
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)